REFIX LUCIDO should be applied to clean and completely dry surfaces. Before use, shake the product well to ensure an even distribution of the maintenance wax.

• Apply the product in small amounts to the surface to be maintained.
• Spread it evenly with a soft cloth or a wax applicator.
• Allow the product to dry and do not walk on the surface during the drying process.

The product has an approximate drying time of 30–60 minutes and reaches full curing in about 2 hours.

Dry Polishing

Once dry, REFIX LUCIDO can be dry polished to increase and maintain the surface gloss or to remove marks caused by foot traffic. For polishing, use:

• a wool cloth;
• a floor polisher with felt pads;
• red hand pads;
• a single-disc floor machine with red discs.

Application Frequency

How often REFIX LUCIDO should be applied depends on foot traffic and surface wear:

• Every 4–6 months on heavily trafficked surfaces subject to significant wear, such as shops, public premises, bars, restaurants, kitchens, entrances and bathrooms.
• Every 12 months on surfaces with limited foot traffic, such as bedrooms and living rooms.

Approximate Coverage

With 1 litre of REFIX LUCIDO, you can maintain approximately 30–40 m² of surface. Coverage is approximate and may vary depending on the surface finish of the material.

Related Products

For the initial finish and the subsequent cleaning and maintenance of treated surfaces, we recommend:

• IDROFIN LUCIDO – gloss finishing wax for absorbent mineral surfaces indoors, used to create the initial finish of the treatment.
• FLORA – concentrated pH-neutral cleaner for the gentle routine cleaning of wax-treated and untreated floors.
• DETERBRILL – concentrated sanitising and gloss-enhancing cleaner for wax-treated terracotta and stone floors.

What Is REFIX LUCIDO Used For?

REFIX LUCIDO is a gloss maintenance wax for already treated terracotta, natural stone and absorbent cement-based agglomerates. It renews surface protection affected by normal wear and helps preserve the protective and aesthetic properties of the original gloss finish over time.

Why Use REFIX LUCIDO on Wax-Treated Floors?

Normal use and foot traffic can gradually wear down the surface protection of the existing treatment. REFIX LUCIDO renews this protection periodically, helps maintain the gloss finish and makes treated surfaces easier to clean and maintain.

What Is the Difference Between REFIX LUCIDO and IDROFIN LUCIDO?

IDROFIN LUCIDO is a gloss finishing wax used to complete the initial surface treatment, while REFIX LUCIDO is a gloss maintenance wax for surfaces that have already been treated. REFIX LUCIDO is therefore used periodically to renew surface protection and preserve the existing gloss finish over time.

Which Surfaces Can REFIX LUCIDO Be Used On?

REFIX LUCIDO is suitable for already treated, absorbent mineral surfaces indoors, including terracotta, natural stone and cement-based agglomerates with a gloss finish.

Does REFIX LUCIDO Help Keep Floors Glossy?

Yes. REFIX LUCIDO is specifically designed to maintain gloss finishes and helps preserve their appearance over time. Once dry, it can also be dry polished to increase and maintain the surface gloss.

Can REFIX LUCIDO Be Polished After Application?

Yes. Once dry, the surface can be dry polished to increase the gloss or remove marks caused by foot traffic. You can use a wool cloth, a floor polisher with felt pads, red hand pads or a single-disc floor machine with red floor pads.

How Often Should REFIX LUCIDO Be Applied?

Application frequency depends on foot traffic and surface wear. On heavily trafficked surfaces, such as shops, public premises, bars, restaurants, kitchens, entrances and bathrooms, apply REFIX LUCIDO every 4–6 months. On areas with limited foot traffic, such as bedrooms and living rooms, it can generally be applied every 12 months.

How Do You Apply REFIX LUCIDO?

Shake the product before use, then apply a small amount to a clean and dry surface. Spread it evenly with a soft cloth or wax applicator. Do not walk on the surface while the product is drying.

How Long Does REFIX LUCIDO Take to Dry?

The approximate drying time is 30–60 minutes, while full curing takes about 2 hours. Avoid walking on the surface during this period.

Does REFIX LUCIDO Make Floors Easier to Clean?

Yes. Periodic maintenance with REFIX LUCIDO renews the surface protection of the existing treatment and makes treated floors easier to clean and maintain over time.

How Much REFIX LUCIDO Is Needed for Floor Maintenance?

Coverage varies depending on the surface finish of the material. As a general guide, 1 litre of REFIX LUCIDO covers approximately 30–40 m².

Which Cleaners Should Be Avoided After Applying REFIX LUCIDO?

When cleaning surfaces maintained with REFIX LUCIDO, avoid strongly alkaline cleaners, ammonia-based cleaners and solvents.

Hazard statements: safety data sheet available on request.

Rev4-Ver060422