SGRISER® can be used undiluted or diluted with water, depending on the cleaning task and the type of dirt to remove.

• Undiluted: for intensive stripping and for removing heavy oil and wax residues, large build-ups of greasy dirt and organic residues. It can also help tackle dark marks on terracotta.
• Diluted 1:1 with water: for cleaning tasks that require strong degreasing and stripping action.

How To Use the Product

• For standard stripping, spread the product evenly over the surface and leave it to work for at least 10–20 minutes.
• Scrub the surface with synthetic-fibre pads or discs, or with nylon brushes.
• For treatments that are particularly difficult to remove, work SGRISER® undiluted over the surface and allow it to dry to increase its stripping action.
• Repeat the cleaning process if necessary.
• On acid-resistant surfaces, neutralise with an acidic water-based solution.
• On more delicate materials, such as polished marble, polished terrazzo and slate, rinse thoroughly with water only.

Coverage

The coverage varies according to the type of dirt and the absorbency of the material:

• for intensive cleaning: 1 litre per 4–8 m²;
• for standard cleaning: 1 litre per 10–15 m².

Related Products

For specific cleaning and treatment processes on stone and mineral surfaces, you can also use:

• VIACEM® – strong buffered acid cleaner specifically formulated to remove cement grout residues, efflorescence and limescale deposits from terracotta surfaces;
• DELICACID® – mild descaling acid cleaner for natural stone, concrete and other stone and mineral surfaces that resist acidic substances;
• EXCEL PLUS – stain-resistant protective treatment for absorbent stone and mineral surfaces.

What Is SGRISER® Used For?

SGRISER® is a heavy-duty stripping and degreasing cleaner for stone and mineral surfaces. It removes old oil- and/or wax-based impregnating treatments, heavy grease deposits, built-up greasy dirt and organic residues.

What Materials Can SGRISER® Be Used On?

SGRISER® provides intensive stripping and degreasing action on terracotta, natural stone, clinker, porcelain stoneware, marble, concrete, terrazzo and other stone and mineral surfaces. You can also use it on delicate materials such as polished marble and slate, provided you follow the specific rinsing instructions.

Can SGRISER® Be Used On Marble?

Yes. You can use SGRISER® on marble to remove old oil- and/or wax-based impregnating treatments and heavy grease deposits. After cleaning polished marble, rinse thoroughly with water only.

Can SGRISER® Be Used On Porcelain Stoneware?

Yes. Porcelain stoneware is one of the materials suitable for SGRISER®. The product provides intensive stripping and degreasing action on this type of surface.

Does SGRISER® Remove Old Oil And Wax Treatments?

Yes. SGRISER® removes old oil- and/or wax-based impregnating treatments from stone and mineral surfaces. For stripping and removing heavy oil or wax residues, use the product undiluted.

Can SGRISER® Remove Greasy Dirt And Heavy Grease Deposits?

Yes. SGRISER® provides strong degreasing action and removes heavy grease deposits and large build-ups of greasy dirt from stone and mineral surfaces, including absorbent materials.

Can SGRISER® Remove Dark Marks From Terracotta?

SGRISER® can help remove dark marks caused by sulphation on terracotta. You can also use the product undiluted to tackle dark marks on stone and mineral surfaces, following the recommended application instructions.

Can SGRISER® Remove Darkening From Outdoor Surfaces?

Yes. SGRISER® provides intensive degreasing action and removes heavy build-ups of greasy dirt and biological deposits that cause darkening on outdoor surfaces.

Should SGRISER® Be Used Undiluted Or Diluted?

You can use SGRISER® undiluted or diluted with water. Use it undiluted for stripping, heavy oil and wax residues, large build-ups of greasy dirt, organic residues and dark marks. For cleaning that requires strong degreasing action, dilute the product 1:1 with water.

How Long Should SGRISER® Be Left To Work?

For standard stripping, spread SGRISER® over the surface and leave it to work for at least 10–20 minutes. Then scrub the surface with synthetic-fibre pads or discs, or with nylon brushes. Repeat the cleaning process if necessary.

How Do You Neutralise SGRISER® After Cleaning?

After cleaning acid-resistant surfaces with SGRISER®, neutralise them with an acidic water-based solution. On more delicate materials, such as polished marble, polished terrazzo and slate, rinse thoroughly with water only.

What Materials Should SGRISER® Not Be Used On?

Do not use SGRISER® on wood, linoleum, rubber or PVC. In addition, protect painted surfaces and anodised aluminium from contact with the product.

Does SGRISER® Leave Residues Or Unpleasant Odours?

SGRISER® leaves no harmful residues in absorbent materials. It also does not leave unpleasant odours during use or in the treated area.

What Is The Coverage Of SGRISER®?

Coverage varies according to the type of dirt and the absorbency of the material. As a guide, 1 litre covers 4–8 m² for intensive cleaning and 10–15 m² for standard cleaning.

WARNINGS: DANGER

Hazard statements: Causes severe skin burns and eye damage.

Precautionary statements: Do not breathe dust / fume / gas / mist / vapors / spray. – Wear protective gloves/clothing and protect eyes/face. – IF SWALLOWED: rinse mouth. DO NOT induce vomiting. – IF IN CONTACT WITH SKIN (or hair): immediately take off all contaminated clothing. Rinse the skin [or take a shower]. – IF IN CONTACT WITH THE EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing. – Immediately call a POISON CENTER/doctor.

Contains: Sodium hydroxide; Ethanolamine

Ingredients in accordance with Regulation (EC) No 648/2004:
Non-ionic surfactants below 5%.

UFI:8800-F0K9-0002-N5JV

Rev8-Ver28112023