RE-CRYSTALBOX® 250GR
€25.53 VAT Included
Polishing Cream for Shower Glass and Crystal Surfaces
RE-CRYSTALBOX® 250GR
€25.53 VAT Included
- BATHROOM PRODUCTS
- Cream-based products
- Glass and Crystal Cleaning
- Glass Cleaning
- Glass Treatment
- PHYSICAL STATE
- PRODUCTS FOR GLASS AND FRAMES
- Water-Based Product
Re-polishing cream for the crystals of shower boxes, glass, and shiny mirrors. Cleans, degreases, polishes, and removes halos and traces of limescale that are difficult to remove. It renews glass and crystal surfaces.
Description
High-performance limescale remover for shower glass – RE-CRYSTALBOX®
Limescale and mineral residues are among the main causes of dull and cloudy bathroom glass, especially on shower enclosures and surfaces exposed to hard water. In these situations, using a specific limescale remover for shower glass allows you to act effectively when regular cleaning is no longer enough. RE-CRYSTALBOX® is a high-performance liquid cream designed for intensive cleaning, able to remove limescale from shower glass and restore shine and transparency to surfaces.
With RE-CRYSTALBOX®, you will also receive the following accessories:
- Drill backing plate
- MELAMINE DRILL PAD
When to use it
RE-CRYSTALBOX® is ideal for treating glass, mirrors, and shower enclosures affected by stubborn haze, scale build-up, and dullness caused by hard water. In particular, it works best when surfaces appear cloudy and marked by mineral deposits that standard cleaners fail to remove.
What it does
RE-CRYSTALBOX® works as a powerful limescale remover for shower glass and targeted descaler. It helps remove limescale from shower glass and eliminate layered stains without scratching the surface. As a result, it restores clarity and improves the overall appearance of the shower enclosure.
How it works
The liquid cream formula acts directly on mineral residues, making limescale removal from shower glass effective even in the most difficult cases. Moreover, applying it with a MELAMINE DRILL PAD ensures controlled and even action. For heavy build-up, you can use a drill with a backing plate and melamine pad to boost cleaning performance.
Cost-effective advantage
Thanks to its targeted action, RE-CRYSTALBOX® removes even stubborn limescale in a single application. Therefore, it reduces the need for repeated treatments and simplifies future maintenance.
Specific uses
RE-CRYSTALBOX® is suitable for glass, shower enclosures, mirrors, and crystal surfaces affected by limescale build-up. It is the ideal solution whenever you need to remove limescale from shower glass and restore original transparency.
Durability
When used correctly, RE-CRYSTALBOX® restores the original look of surfaces and enhances the effectiveness of routine cleaning. In addition, it helps slow down the formation of new visible deposits.
Technical limitations
RE-CRYSTALBOX® must not be used on acid-sensitive surfaces or incompatible materials. Always test the product on a small hidden area before full application.
How to remove stubborn limescale from shower glass
Stubborn limescale on shower glass forms due to mineral residues in water that build up over time, leaving surfaces dull and marked. Regular cleaning is often not enough. Instead, you need a targeted solution with specific products that dissolve deposits without damaging the surface. Using the right tools and treatments allows you to restore clarity and shine effectively.
👉 Learn more: “How to remove stubborn limescale from shower glass”
How to use
The product is ready to use.
Apply on clean and thoroughly descaled surfaces. For best results, we recommend pre-cleaning with SANI-KAL FORTE and WHITE BUFFER PAD to enhance treatment performance.
- Before application, shake the bottle well.
- Pour a small amount of product onto a MELAMINE DRILL PAD and slightly dampen the surface, working on small areas (a few cm² at a time).
- Leave the product to act for 2–3 minutes without letting it dry.
- Rub using circular motions, applying firm mechanical action until deposits are removed.
- For stubborn build-up, use a drill or driver with a DRILL BACKING PLATE and MELAMINE DRILL PAD to increase effectiveness.
- Rinse with water or with VETRONET for an optimal finish.
- Dry with a microfiber cloth.
Repeat the process if necessary until full glass transparency is restored.
Coverage
The coverage of RE-CRYSTALBOX® depends on the level of build-up, the condition of the glass, and the intensity of the mechanical action during application. As a concentrated polishing cream, only small amounts are needed to achieve effective results.
With a 250 g pack, the estimated coverage is:
- Light dirt or routine maintenance (slightly dull glass with light surface haze)
A 250 g pack allows approximately 25–35 full cleanings of a standard shower enclosure. - Moderate dirt (visible limescale and non-layered residues)
250 g allows approximately 15–25 treatments, depending on surface size and required effort. - Heavy limescale or stubborn deposits (layered build-up and visibly cloudy glass)
Coverage may decrease to around 8–15 treatments, due to higher product usage and possible repeated applications.
The indicated quantities are approximate estimates and may vary depending on glass condition, limescale level, applied pressure, and tools used.
Related products
For best results in cleaning and maintaining shower glass, we recommend combining:
- SANI-KAL FORTE – descaling cleaner for pre-cleaning glass, crystal, ceramics, and sanitary surfaces;
- WHITE BUFFER PAD – non-abrasive pad for intensive surface cleaning;
- VETRONET – cleaner for routine maintenance of glass, mirrors, and shiny surfaces.
Faq
How to use RE-CRYSTALBOX® on shower glass
To use RE-CRYSTALBOX® correctly, work on small areas (a few cm² at a time). Apply the product onto a MELAMINE DRILL PAD and rub with circular motions until the limescale is completely removed.
Is surface preparation required before application
Yes. First, clean the glass with SANI-KAL FORTE and MELAMINE PAD to remove surface dirt and improve the effectiveness of the treatment.
How to treat very stubborn limescale deposits
For particularly heavy build-up, use a drill or driver with a BACKING PLATE and MELAMINE PAD. This increases the mechanical action and makes limescale removal easier and faster.
What to do after application
Once the deposits have been removed, rinse with water or with SANI-KAL FORTE. Then dry with a microfiber cloth to achieve a clean, streak-free, and shiny surface.
Warnings
WARNINGS: WARNING
Hazard statements: Causes serious eye irritation.
Precautionary statement: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/… – If eye irritation persists: Get medical advice/ attention.
Ingredients compliant with Regulation (EC) No. 648/2004:
non-ionic surfactants 5%, preservatives
UFI: E6D0-T0HF-J00U-KMJU
Rev2-Ver03022026
Customers who viewed this product also viewed
DISINKROSTO WC®
Acid-based gel descaler specifically formulated to remove stubborn limescale in the toilet. It clings to internal surfaces, works effectively under the rim, and helps restore hygiene and cleanliness.
8.85€
GRES LINDO®
Concentrated degreasing detergent for surfaces in porcelain tiles and ceramic materials. It cleans, degreases and does not contaminate the material with soaps and surfactants. It keeps the joints and the floor clean.
8.00€
MAGIC SPONGE MARBEC
Melamine sponge ideal for removing stains, streaks, and marks from walls, doors, and household surfaces. Used with water only, it allows fast and effective cleaning even on stubborn dirt, without detergents.
2.33€
MELAMINE BUFFER PAD | Micro abrasion
Melamine sponge for cleaning hard and microporous surfaces such as ceramic, marble, terracotta, porcelain stoneware, wood and concrete. Also suitable for glass, crystal and resilient surfaces, it removes dirt and surface marks.
2.92€
OVEN AND BBQ KIT
Cleaning kit for ovens and BBQs affected by carbonised dirt. Designed to remove baked-on grease and carbon residue, and to support routine maintenance of surfaces exposed to high temperatures.
16.19€
PULIFORNO®
Strong degreasing and descaling detergent in gel specific for the extraordinary cleaning of greasy substances, crusts, carbon residues and carbon black that are difficult to remove from ovens, barbecues and oven dishes.
8.88€
PULIMUFFE®
Sanitizing whitening cleaner for the removal of mould and organic black stains from bathroom surfaces, shower enclosures, tiles and plaster.
4.26€
SANI-KAL FORTE
Professional limescale cleaner with controlled descaling action for intensive cleaning of bathroom surfaces affected by stubborn build-up. It removes limescale deposits, soap residues, urine stains, and rust marks, leaving surfaces clean, shiny, and bright.
3.78€
SHOWER BRILL
Anti-scale protective detergent to keep the surfaces of the bathrooms clean and shiny over time. It removes limestone residues and forms an invisible protection that prevents them, ensuring a long-lasting and effective cleaning and protection.
4.61€
WHITE BUFFER PAD | No Abrasion
White buffer pad in non-abrasive synthetic fibers for cleaning and polishing delicate surfaces, ideal for treating sensitive materials without scratching.
5.65€
Related Articles
