PULIMUFFE®
€4.17VAT Included
Mould Sanitizing Whitening Cleaner
PULIMUFFE®
€4.17VAT Included
- BATHROOM PRODUCTS
- Cleaning of coverings
- Cleaning of Sanitary Ware and Taps
- Cleaning Sinks
- Cleaning Worktops, Hobs, Tables, Fridges
- Degreasing Detergents
- DETERGENTS
- Floor Joints Detergents
- KITCHEN PRODUCTS
- Liquid Product
- PHYSICAL STATE
- Removal of Algae, Mould and Biological Encrustations
- Spray Product
- STAIN REMOVER CLEANERS
- Water-Based Product
Sanitizing whitening cleaner for the removal of mould and organic black stains from bathroom surfaces, shower enclosures, tiles and plaster.
Description
Sanitizing whitening cleaner for organic black mould stains – PULIMUFFE®
Organic black stains, such as mould and biological residues, easily develop on surfaces exposed to moisture and condensation, especially in bathrooms and kitchens. In these environments, you need a targeted mould stain remover combined with a sanitizing bathroom surface cleaner that acts effectively where standard cleaning falls short.
When you need to remove mould from shower enclosures, tiles or walls, routine cleaning is often not enough. PULIMUFFE® is specifically formulated for both regular maintenance and intensive cleaning of surfaces affected by organic blackening.
When to use it
PULIMUFFE® is recommended in the presence of surface mould, organic black stains or dark marks on walls, shower cabins, tiles and damp-prone areas.
It is suitable for deep cleaning treatments as well as for periodic maintenance in domestic settings such as bathrooms and kitchens.
What it does
PULIMUFFE® works as a sanitizing whitening cleaner. It helps remove organic black mould stains while improving the overall appearance of treated surfaces.
At the same time, its sanitizing action supports deep cleaning, making this mould cleaner particularly effective in areas exposed to condensation and persistent humidity.
How it works
The formula of PULIMUFFE® is a chlorine-active alkaline whitening solution designed to act on organic deposits responsible for black staining.
It penetrates biological dirt and makes removal easier during rinsing, without aggressive abrasion.
As a result, this whitening surface cleaner allows targeted, repeatable treatments over time.
Cost-effective advantage
Regular use of PULIMUFFE® helps keep surfaces clean and visually uniform for longer, reducing the need for costly restoration work.
Proper maintenance also protects materials and finishes, making ongoing cleaning easier and more efficient.
Specific uses
PULIMUFFE® is suitable for:
- shower enclosures and bathroom surfaces affected by mould;
- ceramic tiles and wall coverings;
- plaster and render;
- untreated stone, terracotta and cement-based surfaces;
- untreated raw wood (after preliminary testing).
It is particularly effective on surfaces where organic black stains develop due to persistent humidity.
Durability
When used correctly as a sanitizing mould cleaner, PULIMUFFE® helps maintain cleaner surfaces over time.
You can further extend the visual cleaning effect by ensuring proper room ventilation and scheduling regular maintenance.
Technical limitations
Do not use PULIMUFFE® on:
- painted or treated wood;
- absorbent surfaces treated with wax (e.g. waxed terracotta);
- polished marble;
- methacrylate bathtubs;
- fabrics;
- metals.
On coloured paints or plaster, always carry out a preliminary test.
Useful insights on mould and organic black stains
To achieve the best results and use the product correctly according to the type of staining, it is helpful to understand common issues related to moisture, condensation and organic residues in bathrooms and kitchens.
If you want to know why black stains appear and return, when a specific cleaner is required and how to manage maintenance over time, explore our practical guides:
- Black stains in the bathroom: why they appear and why they keep coming back
An in-depth look at the most common causes (condensation, water stagnation and poor ventilation) and how to plan an effective, repeatable cleaning routine.
👉 Article link “Black mold stains in the bathroom: why they appear and why they keep coming back” - Can Mold Be Permanently Removed from Walls?
A clear guide to distinguish surface removal from prevention, set realistic expectations and treat walls and plaster correctly.
👉 Article link “Can Mold Be Permanently Removed from Walls?” - Dark stains on kitchen countertops: why they appear on stone, porcelain and composite materials
Useful for identifying organic blackening and dark marks on kitchen surfaces, understanding the causes and choosing the most suitable cleaning method.
👉 Article link “Dark stains on kitchen countertops: why they appear on stone, porcelain and composite materials”
These insights help you choose the most appropriate cleaning method, use PULIMUFFE® correctly and simplify long-term surface maintenance.
How to use
The product is ready to use and must be applied directly to the surface to be treated.
During application, it is advisable to wear protective gloves to avoid direct contact with the skin.
Apply PULIMUFFE® by spraying it evenly over the surface affected by organic black mould stains.
Leave the product to act for a few minutes to allow the whitening and sanitizing action to work effectively on the contamination.
Then, rub the surface using the most suitable tool according to the material:
- specific surfaces sponges,
- white pad,
- microfibre cloth,
- nylon brush,
- nylon grout brushes.
In the presence of heavy or layered organic deposits, extend the contact time up to 30–60 minutes.
Once the treatment is complete, rinse thoroughly with clean water.
On coloured paints or plaster, always carry out a preliminary test on a small hidden area to check colour resistance.
The product may cause dulling on methacrylate; therefore, use caution near bathtubs or surfaces made of this material.
Coverage rate
The coverage of PULIMUFFE® may vary depending on the level of contamination, contact time and surface porosity.
With a 750 ml bottle, the approximate coverage is as follows:
- Light contamination or routine maintenance
(surface blackening, early-stage mould on tiles or shower enclosures): approximately 10–12 m² can be treated. - Medium contamination
(visible mould on bathroom walls, tiles or grout exposed to humidity): approximately 7–9 m² can be treated. - Heavy or stubborn contamination
(thick organic black stains on plaster, poorly ventilated walls or porous surfaces): coverage may decrease, depending on the higher product consumption and longer contact time required.
The indicated quantities are approximate estimates and may vary according to surface conditions, application method and the severity of organic buildup.
Related products
For a complete and targeted cleaning of surfaces affected by organic residues and limescale, you may also use:
- SANI-KAL FORTE – strong descaling cleaner for ceramics and sanitary ware, designed to remove limescale and mineral deposits.
- SHOWER BRILL – routine maintenance cleaner with descaling and protective action, delivering a bright finish on ceramics, sanitary ware, taps and stainless steel.
- DISINKROSTO WC® – powerful acidic gel descaler specifically formulated to remove stubborn limescale inside the toilet bowl.
Faq
What are the main benefits of PULIMUFFE® for surface cleaning?
PULIMUFFE® is a sanitizing whitening cleaner designed to remove organic black stains caused by mould and persistent moisture.
It acts directly on affected surfaces, improving their appearance while supporting deeper cleaning in areas exposed to condensation.
When used correctly and regularly, it helps keep surfaces cleaner over time and reduces the need for more intensive restoration treatments.
Which surfaces is PULIMUFFE® suitable for routine cleaning?
PULIMUFFE® is recommended for the periodic cleaning of moisture-prone surfaces such as:
- shower enclosures and bathroom surfaces,
- ceramic tiles and wall coverings,
- interior walls exposed to condensation,
- kitchen surfaces exposed to steam.
It is particularly useful in environments where organic black stains tend to reappear easily.
Can PULIMUFFE® be used on plaster and untreated wood?
Yes, PULIMUFFE® can also be used on plaster and untreated raw wood.
Before application, always carry out a preliminary test on a small hidden area to check material compatibility and evaluate the final result.
Is PULIMUFFE® suitable for cleaning ceramic tiles?
Yes, PULIMUFFE® is suitable for cleaning ceramic tiles.
It helps remove black stains and organic residues typically found in damp environments, keeping surfaces clean and visually uniform.
Warnings
WARNINGS: DANGER
Hazard statements: Causes severe skin burns and eye damage. -Very toxic to aquatic life. -Toxic to aquatic life with long lasting effects. -Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements: Do not breathe dust / fume / gas / mist / vapours / spray. – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. – Wear protective gloves/ protective clothing / eye protection / face protection. – Immediately call a POISON CENTER / doctor / . . . – Avoid release to the environment. – IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Contains: Sodium hypochlorite 14/15% V°
Ingredients in accordance with Regulation (EC) No 648/2004:
Chlorine-based brighteners < 5 %, sodium hydroxide <1%, non-ionic surfactants <5%, perfume.
UFI: 3850-T0M9-R00R-0YCM
Rev6-Ver07022022
Customers who viewed this product also viewed
CREAM INOX®
Cleaning and polishing cream for deep cleaning of stainless steel and aluminium surfaces dulled by use. It cleans, degreases and refreshes surface appearance, helping improve the visibility of micro-scratches. It leaves no streaks and releases no harmful fumes.
6.58€
DISINKROSTO WC®
Acid-based gel descaler specifically formulated to remove stubborn limescale in the toilet. It clings to internal surfaces, works effectively under the rim, and helps restore hygiene and cleanliness.
8.67€
GRES LINDO®
Concentrated degreasing detergent for surfaces in porcelain tiles and ceramic materials. It cleans, degreases and does not contaminate the material with soaps and surfactants. It keeps the joints and the floor clean.
7.84€
OVEN AND BBQ KIT
Cleaning kit for ovens and BBQs affected by carbonised dirt. Designed to remove baked-on grease and carbon residue, and to support routine maintenance of surfaces exposed to high temperatures.
15.87€
PULI FUGHE
Whitening detergent for the deep degreasing cleaning of cement or synthetic joints of floors and walls.
6.01€
PULIFORNO®
Strong degreasing and descaling detergent in gel specific for the extraordinary cleaning of greasy substances, crusts, carbon residues and carbon black that are difficult to remove from ovens, barbecues and oven dishes.
8.71€
SANI-KAL BIO
Biodegradable detergent based on natural acids for the descaling cleaning of bathrooms, kitchens, taps, sanitary ware. Leave the surfaces clean, shiny and bright.
4.34€
SANI-KAL FORTE
Professional limescale cleaner with controlled descaling action for intensive cleaning of bathroom surfaces affected by stubborn build-up. It removes limescale deposits, soap residues, urine stains, and rust marks, leaving surfaces clean, shiny, and bright.
3.71€
SHOWER BRILL
Anti-scale protective detergent to keep the surfaces of the bathrooms clean and shiny over time. It removes limestone residues and forms an invisible protection that prevents them, ensuring a long-lasting and effective cleaning and protection.
4.51€
Related Articles
Black mold stains in the bathroom, especially black stains in the shower, are among the most frustrating cleaning problems at home. These dark marks appear on walls, grout lines and shower silicone. Even after careful cleaning, they often return in the same spots. Many people assume it is just surface dirt or a weak cleaner. However, in most cases the real cause is deeper. It is usually linked to organic buildup and persistent moisture in the bathroom.
