ROBOGRES®
€10.78VAT Included
Detergent for Robot Mops and Floor Washers on Porcelain Tiles
ROBOGRES®
€10.78VAT Included
- DETERGENTS
Super-concentrated pH-neutral floor cleaner for robot mops and floor washers, specifically designed for porcelain tiles and ceramic floors. It cleans effectively without leaving residue, produces no foam, and dries quickly to help prevent streaks and haze.
Description
Specific Cleaner for Robot Mops and Floor Washers on Porcelain Tiles and Ceramic Surfaces – ROBOGRES®
ROBOGRES® is a specific cleaner for robot mops on porcelain tiles, designed for porcelain stoneware and ceramic surfaces. It also works as a streak-free porcelain tile floor cleaner. Its super-concentrated formula is ideal for robot floor cleaners because it produces no foam, dries quickly, and helps reduce residue, haze, and streaks. As a result, floors look cleaner and more uniform, even under direct light.
When to Use It
ROBOGRES® is recommended for the regular cleaning of:
- porcelain tile floors
- ceramic surfaces
It is especially suitable when:
- the floor easily shows streaks and haze
- you want to prevent the typical film caused by repeated washing
- you regularly use a robot mop or a hard floor washer
- your household water contains high levels of limescale, which may cause dullness over time
What It Does
ROBOGRES® works as a targeted cleaner for porcelain tiles and ceramics. It helps to:
- remove everyday dirt effectively
- reduce the formation of streaks and surface haze
- prevent residue build-up that can make the floor look dull
- leave a light floral fragrance in the room
Unlike a generic multi-surface cleaner, ROBOGRES® is specifically designed to improve the final appearance of porcelain tiles, where streaks and uneven drying are often the main issue.
In addition, although it is a pH-neutral cleaner, ROBOGRES® performs effectively in the typical conditions of robot floor cleaning. It helps counteract the effects of hard water and can slow down or reduce the formation of limescale haze, which may gradually make porcelain tiles look dull and uneven.
How It Works
ROBOGRES® has been developed specifically for robot mops and floor washing devices. Therefore:
- it works effectively even at very low concentrations
- it does not create foam, helping devices operate correctly
- it features fast evaporation, which promotes cleaner drying
- it is a pH-neutral cleaner, suitable for frequent use and formulated to help reduce the risk of allergic reactions
When used regularly, ROBOGRES® acts as a streak-free porcelain tile cleaner and helps keep surfaces cleaner, brighter, and more uniform over time.
Specific Applications
ROBOGRES® can be used on:
- matte porcelain tiles
- lapped porcelain tiles
- polished porcelain tiles
- ceramic surfaces
It is compatible with all types of robot mops and floor washers, without affecting their operation or leaving residue on the floor.
Main Differences Compared to ROBONETTO®
ROBOGRES® is not a universal cleaner. Instead, it is a specialized cleaner for porcelain tiles and ceramic surfaces, developed to solve the most common issues related to these materials.
Compared to ROBONETTO®:
- it focuses on the visual appearance of porcelain tiles, helping reduce streaks and haze visible under direct light
- it is ideal for floors that easily show streaks, dullness, and uneven drying
- it is the best choice when you need a targeted cleaner for matte, lapped, or polished porcelain tiles
If you need a cleaner suitable for multiple materials such as wood, LVT, SPC, rubber, or linoleum, the right solution is ROBONETTO®, which has been formulated as a multi-surface cleaner.
Technical Limitations
ROBOGRES® is formulated for the regular cleaning of porcelain tiles and ceramic surfaces with robot mops and floor washers. However:
- it is not a restoration product for heavy haze or layered residues. If the floor already shows visible surface film, carry out a preliminary deep cleaning with POWER DET® + BLUE BUFFER PAD before regular maintenance;
- to avoid streaks and haze, always follow the recommended dosage and do not use excessive amounts of product;
- if your home has very hard water, limescale marks and dullness may still appear independently of the detergent. In this case, use distilled water or rinse the device tank regularly;
- it is not designed as a multi-surface cleaner. For floors other than porcelain tiles, such as wood, LVT, SPC, rubber, or linoleum, it is preferable to use ROBONETTO®, which is formulated for multiple materials.
Useful Guides for Everyday Porcelain Tile Cleaning with Robot Mops
To achieve the best results with ROBOGRES® on porcelain tiles and ceramic surfaces, it is useful to understand some common situations related to automatic floor cleaning.
If you want to learn how to prevent streaks, haze, and residue build-up while keeping floors cleaner and more uniform over time, read our practical guides:
- Robot Floor Cleaners: Why They Are Becoming So Popular (and How to Use Them Correctly): a useful guide to understand how robot floor cleaners work, which mistakes are most common, and which habits help keep floors cleaner and more uniform over time.
👉 Read the article - Robot Floor Cleaners on Porcelain Tiles: How to Prevent Streaks, Haze, and Residue: a practical guide dedicated to porcelain tiles. It explains why these surfaces easily show marks under direct light, how to manage hard water and detergent dosage, and how to reduce haze caused by frequent washing.
👉 Read the article
These guides help you choose the best cleaning method, use ROBOGRES® correctly, and keep porcelain tile floors cleaner, more uniform, and free from residue over time.
How to use
ROBOGRES® must be used diluted in water, following the recommended dosage to achieve effective cleaning without leaving streaks or residue.
- Dilute 15 ml of ROBOGRES® in 500 ml of water using the product’s dosing cap.
- Pour the cleaning solution into the tank of the robot mop or floor washer.
- Proceed with regular cleaning according to the device instructions.
Instructions for Very Hard Water
If your household water contains high levels of limescale, we recommend using distilled water to help prevent:
- clogging of the robot mop tank
- the formation of limescale residue on the floor surface
- the appearance of haze and streaks after drying
Alternatively, it is advisable to rinse the device tank regularly (for example, once a week) to reduce limescale build-up.
Coverage and Yield
The product coverage may vary depending on the type of floor, the level of dirt, the cleaning frequency, and the tank capacity of the robot mop or floor washer.
With a 1 litre bottle, using the recommended dilution of 15 ml in 500 ml of water, you can prepare approximately 33 tanks of cleaning solution, equal to more than 30 litres of diluted cleaner.
- On matte porcelain tiles or ceramic floors with light dirt, cleaned regularly, 1 litre of ROBOGRES® provides approximately 30–33 full cleaning cycles with a 500 ml tank, covering up to around 900 m² of surface area.
- On lapped or polished porcelain tiles, where streaks and haze are more visible, the product still delivers high coverage when used at the correct dosage. One litre provides approximately 28–32 full cleaning cycles, depending on cleaning frequency and water consumption.
- In the presence of medium dirt levels or less frequent cleaning, such as footprints, dust build-up, or everyday residue, 1 litre provides around 24–28 full cleaning cycles, since some areas may require additional passes.
- With heavier dirt, existing haze, or layered residue, coverage may decrease further. In these cases, ROBOGRES® is recommended for routine maintenance after carrying out a preliminary deep cleaning treatment.
The values indicated are approximate estimates and may vary depending on room size, floor type, dirt level, water hardness, and device settings.
Related Products
For more targeted cleaning based on the floor material, you can also use:
- ROBOPARQUET® – a specific cleaner for the regular maintenance of wood and parquet floors, designed to protect finishes and provide even cleaning without residue.
- ROBONETTO® – a multi-surface cleaner for robot mops and floor washers, suitable for the regular cleaning of different materials such as stone surfaces, resilient floors, and wood when a more versatile solution is required.
Faq
What is ROBOGRES® used for?
ROBOGRES® is designed for the regular cleaning of porcelain tile and ceramic floors with robot mops and floor washers. It helps keep surfaces clean, uniform, and free from residue.
Which surfaces is it most effective on?
ROBOGRES® works best on porcelain tiles and ceramic surfaces, including matte, lapped, and polished porcelain tiles.
Does ROBOGRES® help prevent streaks and haze on porcelain tiles?
Yes. ROBOGRES® is formulated to clean without leaving residue and helps reduce streaks, haze, and dull marks that are often visible under direct light.
Does it create foam inside robot mops?
No. ROBOGRES® is a low-foam cleaner specifically developed for robot mops and floor washing devices.
Is it effective at low concentrations?
Yes. ROBOGRES® is a super-concentrated cleaner that works effectively even at very low dilution levels.
Can it be used on polished porcelain tiles?
Yes. ROBOGRES® is suitable for matte, lapped, and polished porcelain tiles, as well as ceramic surfaces.
Is ROBOGRES® a pH-neutral cleaner?
Yes. ROBOGRES® is a pH-neutral cleaner formulated for frequent use and designed to help reduce the risk of allergic reactions.
Is it compatible with all robot mops?
Yes. ROBOGRES® can be used with all types of robot mops and floor washing devices.
What should I do if the floor already has surface haze?
If the floor already shows visible haze or dull marks under direct light, we recommend carrying out a preliminary deep cleaning treatment with POWER DET® and BLUE PAD before using ROBOGRES® regularly.
What should I do if my household water is very hard?
If your water contains high levels of limescale, we recommend using distilled water or rinsing the robot mop tank regularly to help prevent limescale residue, haze, and streaks on the floor.
Is ROBOGRES® a multi-surface cleaner?
No. ROBOGRES® is specifically formulated for porcelain tiles and ceramic surfaces. For regular cleaning on multiple floor types, ROBONETTO® is the more suitable solution.
Warnings
WARNINGS: DANGER
Hazard statements: Causes serious eye irritation.
Precautionary statement: Keep out of reach of children. – Wear eye protection/face protection. – If eye irritation persists: Get medical advice/ attention.
Ingredients according to Regulation (EC) No. 648/2004
Non-ionic surfactants less than 5%, Anionic surfactants less than 5%, Perfume, Preservatives.
UFI: QKC0-80PP-E00D-Y7GD
Rev1-Ver05122024
Customers who viewed this product also viewed
BLUE BUFFER PAD | Light Abrasion
Light abrasive blue buffer pad for deep cleaning and stain removal on porcelain stoneware, ceramic and wood, improves cleaner performance and final surface results.
4.23€
5.65€
GRES BRILL®
Concentrated descaling cleaner specifically formulated for the routine and periodic cleaning of polished porcelain tile and ceramic surfaces. Removes limescale film, water marks and hard water residues without leaving streaks or surface film, keeping surfaces bright and uniform.
8.39€
GRES LINDO®
Concentrated degreasing cleaner specifically designed for the routine and periodic cleaning of matte porcelain tile. Removes greasy films, household dirt and footprints without leaving residues or streaks, helping keep surfaces uniform and grout joints cleaner.
8.00€
POWER DET®
High-performance descaling and stain-removing cleaner, specifically formulated for extraordinary cleaning and post-installation cleaning of polished, lapped and matt porcelain tile floors. Effectively removes haze, stains, surface films and stubborn construction residues, restoring porcelain tiles to a uniform appearance and their original look.
20.80€
PULI FUGHE
Degreasing and whitening cleaner for the deep cleaning of blackened cementitious or synthetic grout joints on porcelain stoneware, ceramic, klinker and mosaic floors and wall coverings. Removes dirt, grease and dark stains without using acids or bleach.
6.14€
PULIMUFFE®
Sanitizing whitening cleaner for the removal of mould and organic black stains from bathroom surfaces, shower enclosures, tiles and plaster.
4.26€
ROBONETTO®
Super-concentrated neutral pH floor cleaner for robot mops and wet vacuum cleaners, suitable for all floor types. It deep cleans without leaving residue, produces no foam and dries quickly, helping prevent streaks and surface haze.
10.20€
ROBOPARQUET®
Super-concentrated neutral pH floor cleaner for robot floor cleaners and electric mops, specifically designed for wood, parquet and WPC. Deep cleans without leaving residues, produces no foam and dries quickly, helping to prevent streaks and surface haze while protecting finishes.
11.30€
SANI-KAL FORTE
Professional limescale cleaner with controlled descaling action for intensive cleaning of bathroom surfaces affected by stubborn build-up. It removes limescale deposits, soap residues, urine stains, and rust marks, leaving surfaces clean, shiny, and bright.
3.78€
SHOWER BRILL
Anti-scale protective detergent to keep the surfaces of the bathrooms clean and shiny over time. It removes limestone residues and forms an invisible protection that prevents them, ensuring a long-lasting and effective cleaning and protection.
4.61€
Related Articles
Robot floor cleaners have quickly become one of the most popular smart appliances for modern homes. And it’s easy to understand why. Once people try them, they immediately notice the benefits. These automatic cleaning systems work independently, help keep floors cleaner every day, and reduce the time spent on household chores. Today, homeowners choose this technology for more than simple convenience. They want cleaner floors, less effort, and a more practical daily routine.


