Practical Guide: Indoor Oiled Parquet Maintenance

Oiled parquet is one of the most appreciated wood finishes thanks to its natural appearance and its ability to enhance the grain and colour of the wood. However, to preserve both the aesthetic appeal and the protective properties of the original treatment, it is essential to carry out regular maintenance.

Unlike lacquered parquet, oiled parquet requires routine maintenance to renew its surface protection and preserve the wood’s natural appearance.

This guide explains how to clean and properly maintain indoor oiled parquet using the professional Marbec system.

Why Oiled Parquet Requires Regular Maintenance

The oil treatment protects the wood by penetrating deep into the fibres without forming a surface film.

Over time, however, foot traffic, frequent cleaning and everyday wear gradually reduce the effectiveness of the original protection.

Without proper maintenance, oiled parquet may:

• lose its uniform appearance;
• absorb dirt and liquids more easily;
• become more difficult to clean;
• show signs of wear in high-traffic areas;
• lose part of its original surface protection.

Regular maintenance helps preserve the wood’s natural appearance for longer while reducing the need for extensive restoration work.

When Maintenance Is Needed

If oiled parquet is cleaned regularly with suitable wood floor cleaners and maintained with the appropriate protective treatment, most signs of surface wear can be prevented.

However, maintenance is recommended when:

• the floor appears less uniform than it originally was;
• the surface starts retaining more dirt;
• the wood seems less protected against everyday wear;
• visible differences appear in high-traffic areas;
• you want to preserve the natural appearance of the oil finish over time.

👉 Regular maintenance with BIOCARE or BIOCARE OPACO helps keep oiled parquet protected, even and easy to clean while preserving the original characteristics of the treatment.

Recommended Maintenance System for Oiled Parquet

Cleaning and maintaining oiled parquet with a dedicated wood floor cleaner and a protective maintenance wax

The Marbec system consists of two maintenance stages:

• routine cleaning;
• periodic protective maintenance.

Routine Cleaning of Oiled Parquet

Product: PULIBRILL®

PULIBRILL® is the dedicated cleaner for the routine cleaning of oil-treated wooden floors and parquet.

Its formulation effectively cleans the surface without affecting the protective treatment, while respecting the natural structure of the wood.

👉 Proper routine cleaning is essential to prevent dirt build-up that can accelerate the deterioration of the oil treatment.

How to Apply

• dilute 10–15 cc of PULIBRILL® in 1 litre of water;
• apply using a microfibre cloth;
• at the recommended dilution, no rinsing is required;
• suitable for use with floor scrubber machines.

👉 Keeps oiled parquet clean without affecting the oil treatment and helps preserve the wood’s natural appearance.

👉 Read the PULIBRILL® product page

Protective Maintenance for Satin-Finish Oiled Parquet

Product: BIOCARE

BIOCARE is the maintenance wax specifically designed for oil-treated parquet and wooden surfaces.

Its formulation renews surface protection without creating a glossy film, helping preserve both the appearance and the protective properties of the original oil treatment.

When to Apply

The application frequency depends on how heavily the surface is used:

• every 4–6 months in high-traffic areas such as entrances, kitchens, shops, public spaces and corridors;
• every 12 months in less frequently used areas such as bedrooms and sleeping areas.

How to Apply

• apply to a clean, dry surface;
• shake the product well before use;
• spread a small amount of product using a soft cloth;
• apply evenly, avoiding excess product build-up;
• do not walk on the floor while it is drying;
• allow to dry for approximately 1–2 hours.

To increase the sheen or remove light traffic marks, the surface can then be polished using:

• a wool cloth;
• a polishing machine fitted with felt pads;
• a blue pad;
• a single-disc machine fitted with a blue pad.

Coverage

• approximately 1 litre per 30–40 m².

👉 Renews the protection of oiled parquet while helping preserve the wood’s natural satin finish.

👉 Read the BIOCARE product page

Protective Maintenance for Matt-Finish Oiled Parquet

Product: BIOCARE OPACO

BIOCARE OPACO is the maintenance wax specifically developed for matt-finish oiled parquet and wooden surfaces.

It protects and refreshes the surface while preserving the natural appearance of the oil treatment without creating unwanted glossy effects.

When to Apply

• every 4–6 months in high-traffic areas;
• every 12 months on surfaces subject to less wear.

How to Apply

• apply to a clean, dry surface;
• shake the product well before use;
• spread evenly using a soft cloth;
• do not walk on the floor while it is drying;
• allow to dry for approximately 1–2 hours.

Coverage

• approximately 1 litre per 30–40 m².

👉 Preserves the original matt appearance of the parquet while renewing the protection provided by the oil treatment.

👉 Read the BIOCARE OPACO product page

Technician’s Advice

Oiled parquet retains its appearance and protective properties only when maintained on a regular basis. Using overly aggressive cleaners or neglecting the periodic renewal of the protective treatment can accelerate wear and leave the wood more vulnerable to dirt and everyday use.

The best maintenance strategy is to:

• clean regularly with PULIBRILL®;
• apply BIOCARE periodically to satin-finish oiled parquet;
• use BIOCARE OPACO on matt-finish oiled parquet;
• carry out maintenance before the oil treatment shows significant signs of wear.

Regular maintenance helps preserve the natural beauty of oiled parquet over time, making routine cleaning easier and reducing the need for more extensive restoration treatments.