Practical Guide: How to Clean Porcelain Tiles After Installation
Post-installation cleaning of porcelain tiles is essential for removing construction residues and surface films that can leave the floor looking dull and difficult to maintain.
This guide explains when to clean newly installed porcelain tiles and how to carry out the post-installation cleaning process correctly, step by step.
This treatment removes cement grout residues, installation debris, resin films and construction dirt, restoring the original appearance of the porcelain tiles and making routine maintenance much easier over time.
When to Perform Post-Installation Cleaning
- after tile installation and grouting have been completed
- when the floor appears dull, hazy or streaked
- when visible residues can be seen under direct light
Frequency: one-time treatment
How to Clean Porcelain Tiles After Installation
Product: POWER DET®
POWER DET® can be used on all porcelain tile floors, regardless of the finish: matte, polished, semi-polished, textured and anti-slip.
- protect all surfaces that should not come into contact with the product
- wear protective gloves
- apply POWER DET® undiluted directly onto the surface
- work on 4–5 m² at a time
- leave the product to act for at least 10 minutes without allowing it to dry
- scrub using blue pads for manual cleaning or blue discs when using a single-disc floor machine
- remove residues with a cloth or wet vacuum
- rinse thoroughly 2–3 times with clean water
- repeat the process if necessary
👉 Read the POWER DET® product page here
After Cleaning
To make everyday maintenance easier, once the surface is completely dry you can apply ANTISPORCO, an invisible stain-resistant protector that helps safeguard porcelain tiles and grout joints, reduces absorption and simplifies future cleaning.
Professional Tip
Proper post-installation cleaning, carried out with the right method, prevents permanent streaks and future maintenance issues. Applying a stain-resistant treatment can also help preserve the results over the long term.
Where and when
Frequency of use:
Performance and consumption
PRODUCTS USED IN THIS PRACTICAL GUIDE
20.80€
POWER DET®
High-performance descaling and stain-removing cleaner, specifically formulated for extraordinary cleaning and post-installation cleaning of polished, lapped and matt porcelain tile floors. Effectively removes haze, stains, surface films and stubborn construction residues, restoring porcelain tiles to a uniform appearance and their original look.
4.23€
5.65 €
BLUE BUFFER PAD | Light Abrasion
Light abrasive blue buffer pad for deep cleaning and stain removal on porcelain stoneware, ceramic and wood, improves cleaner performance and final surface results.
10.28€
EASYCLEAN 700112 FIXED ALUMINIUM HANDLE 140 CM
Lightweight, rust-resistant anodized aluminium handle designed to reduce fatigue during professional and domestic cleaning tasks.
14.65€
19.53 €
EASY CLEAN SCB.S23 FLEXIBLE BUFFER PAD HOLDER
Used with the corresponding pads during washing phases to exert mechanical force on stubborn dirt for removal.
16.71€
BLUE DISC MARBEC | Light Abrasion
Disc for single-brush machine or washer-dryer, with light abrasive action for the extraordinary cleaning of stone and wood flooring.
16.76€
ANTISPORCO
Stain protection treatment for matte, polished and lapped porcelain tiles. Reduces the absorption of dirt and stains by creating an invisible, non-film-forming protective barrier that makes routine cleaning faster and easier without altering the appearance of the surface.
4.97€
6.62€
PALMPRO 363 CHEMICAL SAFETY GLOVES
Reusable polychloroprene chemical protection gloves with soft internal flock lining and anatomical design, engineered to ensure high chemical resistance, safety and long-lasting comfort.
